For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
 |
 |
 |
 |
| NFPA 1991 Aluminized Fiberglass | TK645 NFPA 1991 | TK644W NFPA 1994 Class I |
LV NFPA 1994 Class III |
| Tychem TK fully encapsulated front entry vapor-protective suit (Level A), expanded back, sealed seams inside and out, 48" zipper, double storm flap with velcro, 2 layer faceshield (10 mil Teflon / 40 mil PVC), 3 layer glove combination of Viton, North Silvershield, and out knit Kevlar, 3 exhaust valves, attached boot socks with boot flaps, 1.5" waist belt with 3 belt loops sewn (inside) and sealed. Includes aluminized fiberglass outercover. Storage bag and Bata Hazmax boots included Sizes: S - 5X Case Pack: 1 Case Wt.: 30 lbs. Also available in rear entry, # TK655 |
Tychem TK fully encapsulated front entry vapor protective suit (Level A), expanded back, sealed seams inside and out, 48" gas tight zipper, double storm flap with velcro, 2 layer wide view faceshield (10 mil Teflon / 40 mil PVC), 3 layer glove combination of Viton, North Silvershield and outer knit Kevlar, 3 exhaust valves, attached sock boots with boot flaps, 1.5" waist belt with 3 loops sewn (inside) and sealed. Storage bag included Sizes: S - 5X Case Pack: 1 Case Wt.: 10 lbs. Must be worn with NFPA Certified boots. Also available in standard lens, #TK644 or #TK654 |
Tychem LV980 class III ensemble. Coverall with collar, zipper, double storm flap with velcro, sock boots with boot flaps, glove ring and clamp assembly with attached 3 layer glove system: North Silvershield (inner), Viton (middle) and knit Kevlar outer. Includes separate bib style hood with 10 mil Teflon outer / 40 mil PVC inner lens, wide vision lens system, 1" adjustable waist belt. Also available in Tychem BR. Sizes: S - 5X Case Pack: 1 Case Wt.: 10 lbs. Must be worn with NFPA Certified boots |
|
| NFPA 1994 is the Standard for Protective Ensembles for Chemical / Biological Terrorism Incidents. Class I Ensembles Class I Ensembles offer the highest level of protection. They are intended for the worst case circumstances, where the substance involved creates an immediate threat, is unidentified and of unknown concentration. Such situations would occur where there is still an on-going release with likely gas / vapor exposure, the responder is close to the point of release, and most victims in the area appear to be unconscious or dead from exposure. Stay times in the hazard zone are likely to be short and limited to the breathing air available from the SCBA. Class III Ensembles Class III Ensembles offer the lowest level of protection. They are intended for use well after the release has occured or in the peripheral zone of the release scence for such functions as decontamination, patient care, crowd control and clean up. Class 3 ensembles should only be used when there is no potential for vapor or gas exposure and exposure to liquids is expected to be incidental through contact with contaminated surfaces. Class 3 ensembles must cover the individual and it is preferred that this clothing also cover the wearer's respirator. Because these ensembles are intended for longer wearing periods, the use of air purifying respirators with these suits is likely. |
|||
 |
 |
| Get comfortable with a Phase Change Cool Vest from Lakeland Industries. Working in Hazmat / Protective suits can make anyone lose their cool. The Phase Change Cool Vests worn under these suits give the user a greater degree of comfort. In fact, it creates a climate of 58º F / 14º C for up to three hours (depending on work environment). These vest create a cooling energy from a unique phase change material that is mechanically sealed in durable inserts. After freezing the inserts in ice water or a refrigerator for just 30 minutes, the vests deliver constant, cool temperature Unlike frozen water or gel products, Lakeland's phase change material maintains a consistant temperature of 58º F / 14º C during its transition from a solid to a liquid. This ensures that the wearer receives a constant cooling temperature throughout the entire two to three hour period. At Lakeland Industries, we are very concerned about the materials we use in our products. The Phase Change Material is made of a proprietary blend of alkanes with unique thermal properties. The inserts are non toxic and non flammable and can be used over and over again. To achieve continuous cooling, additional inserts are available so the user can rotate each set. Designed for comfort, these vests are washable and lightweight. The built in side and shoulder adjustments provide a better fit. To suit a variety of users, the vests come in many styles, sizes and fabrics, including polycotton and Nomex. Style 00055 — Polycotton Cool Vest |
|
 |
 |
 |
| Time is precious when you're on a call. There's no time for fumbling. No time to waste. With Code One® protective wear from Lakeland, you're ready to go. The tough nylon urethane coated jacket and pants are top quality reliable protection. Protection that shields you from liquid splashes and spills. If flame resistance is needed, there are Nomex® versions available. All Code One® EMT wear gives you built in durability and personal comfort, with plenty of features engineered to save seconds and lives. Code One® EMT wear is the smartest part of readiness. You can count on every jacket, pant or ensemble for day to day dependability. Every garment is guaranteed against defects in material or workmanship. Around the world, pros know we stand behind everything we make. That stance made our reputation for quality and integrity. Code One® protective wear is available in the following colors: Royal Blue, Navy Blue, Forest Green, White, Yellow, Orange, Red and Black. Town, department patches and insignia can be custom sewn onto garments. |
||
Features of Code One® EMT Wear:
|
||
 |
|||
Lakeland's ShurRite safety gloves and sleeves made with DuPont 100% Kevlar aramid fiber provide excellent cut resistance for hand and arm protection products. ShurRite offers outstanding cut resistance combined with intermittent heat resistance without affecting their wearer's dexterity. These tough gloves and sleeves will outlast cotton, leather and coated gloves many times over. They greatly reduce potential injuries to worker's hands and contribute to reducing accident claims and insurance costs. Available in various grip enhancing coating and patterns. And where additional protection from heat is required, ShurRite Kevlar Terry gloves are the answer. The terry loop construction provides a cushion of air that insulates against high temperature extremes, while Kevlar adds the cut / slash protection.
|
|||
| ShurRite Gloves | |||
| Style No. | Description | Case Pack | Size |
| 2100 | 100% Kevlar men's knit glove | 25 dozen | S, M, L |
| 2110 | 100% Kevlar ladies knit glove | 25 dozen | S, M, L |
| 2100 OF | 100% Kevlar men's open finger knit glove | 25 dozen | S, M, L |
| 2110 OF | 100% Kevlar ladies open finger knit glove | 25 dozen | S, M, L |
| Lightweight styles | |||
| 2200 | 13 gauge 100% Kevlar men's knit glove | 25 dozen | S, M, L |
| 2210 | 13 gauge 100% Kevlar ladies knit glove | 25 dozen | S, M, L |
| Terry gloves | |||
| 2300 | 100% Kevlar Terry seamless men's knit glove, drop cuff, loop in | 25 dozen | S, M, L |
| 2310 | 100% Kevlar Terry seamless ladies knit glove, drop cuff, loop in | 25 dozen | S, M, L |
| Sleeves | |||
| 4102 | 100% Kevlar, 2-ply sleeve, 3" width | 288 each | 10" |
| 4122 | 100% Kevlar, 2-ply sleeve, 3" width | 288 each | 12" |
| 4142 | 100% Kevlar, 2-ply sleeve, 3" width | 288 each | 14" |
| 4162 | 100% Kevlar, 2-ply sleeve, 3" width | 288 each | 16" |
| 4182 | 100% Kevlar, 2-ply sleeve, 3" width | 288 each | 18" |
| 4222 | 100% Kevlar, 2-ply sleeve, 3" width | 288 each | 22" |
| 4242 | 100% Kevlar, 2-ply sleeve, 3" width | 288 each | 24" |
 |
||
Lakeland's KutBuster protective gloves feature DuPont Kevlar Plus fibers that provede 18% more cut resistance than standard Kevlar brand fiber. These quality gloves retain the same heat and flame resistance offered by standard Kevlar. They won't melt, drip or burn in air. KutBuster gloves keep potentially dangerous sharp edges at bay, outside and away from your hands and fingers. KutBuster gloves are worn in a variety of industrial operations, including metal fabrication, auto and glass manufacturing. KutBuster gives maximum protection and peace of mind to employer and employees alike.
|
||
| KutBuster Gloves | ||
| Style No. | Description | Sizes |
| 25-643 | 7 gauge 100% Kevlar Plus, KutBuster knit glove | S, M, L |
| 25-642 | 7 gauge 100% Kevlar Plus, KutBuster knit glove | S, M, L |
| 25-646 | 7 gauge 100% Kevlar Plus, KutBuster knit glove | S, M, L |
| KutBuster Sleeves | ||
| 25-7-410 | 7 gauge 100% Kevlar Plus, KutBuster sleeve | 10" |
| 25-7-412 | 7 gauge 100% Kevlar Plus, KutBuster sleeve | 12" |
| 25-7-414 | 7 gauge 100% Kevlar Plus, KutBuster sleeve | 14" |
| 25-7-416 | 7 gauge 100% Kevlar Plus, KutBuster sleeve | 16" |
| 25-7-418 | 7 gauge 100% Kevlar Plus, KutBuster sleeve | 18" |
 |
|
Cut resistant Spectra gloves that are the top choice in the food processing industries. Lakeland's glove designers know that very sharp edges call for very tough gloves. That's why Lakeland's DextraGard line of protective gloves and sleeves uses Spectra high performance fibers that provide superior cut and abrasion resistance to a large cross section of the food processing industry. DextraGard gloves are for applications that are routinely exposed to extremely sharp blades and edges. DextraGard gloves fiber surface lets the sharp cutting edges roll over the surface of the glove preventing serious injury. Both industrial manufacturing and food processors prefer DextraGard gloves for being rugged and highly resistant to cuts and abrasion as well as being comfortable and soft. DextraGard reduces hand fatigue that often accompanies repetitive gripping and flexing.
|
|
| 7 Gauge Heavyweight DextraGard Knit Gloves | |
| Style No. | Description |
| 9100 S-XL | Heavyweight DextraGard Spectra knit glove |
| 9600 S-XL | "Pre-washed" Heavyweight DextraGard Spectra knit glove |
| 96-490 S-XL | "Pre-washed" Extended cuff heavyweight DextraGard Spectra knit glove |
| 13 Gauge Lightweight DextraGard Knit Gloves | |
| 9200 S-XL | "Pre-washed" Lightweight DextraGard Spectra knit glove |
| 9500 XS-XL | Lightweight stretchable DextraGard Spectra knit glove |
 |
||
Grapolator gloves: They don't come any tougher. This Lakeland line of extraordinary Grapolator gloves and sleeves offers hand and arm protection to the max. Stainless steel wire core is combined with high strength man made fibers to give workers an extremely effective protective glove. These gloves provide super protection from cuts, and for all their "muscle", lose no comfort or manual dexterity properties. Grapolator gloves can be washed in hot water and hot air dried. Use the Grapolator around sheet metal, knives, sharp plastic edges and glass. Grapolator gloves and sleeves are available in black, gray or blue.
|
||
| Gloves | ||
| Style No. | Description | Sizes |
| 93-100 | Gray, Grapolator, steel reinforced, 10.75" cut resistant | S - XL |
| 93-120 | Black, Grapolator, steel reinforced, 10.75", cut resistant | S - XL |
| 93-125 | Blue, Grapolator, steel reinforced, 10.75", cut resistant | S - XL |
| Sleeves | ||
| 93-4737 | Black, Grapolator sleeve, steel reinforced, 10" long, 4" wide. Other lengths available on request | |
 |
|
Lakeland's heat protective gloves made with proprietary Thermbar yarns are the best solution for problems associated with intermittent handling of hot objects. Thermbar protective gloves are used thoughout the glass and automotive industries, and extensively by laboratory workers in all situations where required heat protection ranges up to 400º to 600º F. Black in color, these gloves are available in a full line of sizes. They may be custom knit for various levels of heat and are produced with various high performance materials including combinations with Kevlar
|
|
| Gloves | |
| Style No. | Description |
| 6100R | 100% Thermbar, heat resistant, 10" men's knit glove |
| 6110 | 100% Thermbar, heat resistant, 9" ladies knit glove |
| 61-391 | 100% Thermbar, heat resistant, 12" men's knit glove |
| 61-474 | 100% Thermbar, heat resistant, 14" men's knit glove |
| 61-494 | Mingled 100% Thermbar / 100% Kevlar, 10" men's glove |
| 61-466 | Mingled 100% Thermbar / 100% Kevlar, 10.25" men's glove |
| 61-420 | Plated 100% Kevlar / 100% Thermbar, 11" men's glove |
| 61-1158 | 100% Thermbar SPOT WELD glove |
| Double Glove Combination | |
| 61-503 | 100% Kevlar outer, 100% Thermbar inner, 12" men's glove (also available with Thermbar outer, Kevlar inner) |
| 7 Gauge Sleeves | |
| 61-5457 | Mingled 100% Thermbar / 100% Kevlar, 14" sleeve |
| 61-4877 | 100% Thermbar, 18" sleeve, 4.75" wide |
| Specialty Products | |
| 61-556 | Pad - 100% Thermbar, 4-ply, 5.75" X 10" |
 |
|
Tougher than tough; that's the only way to describe Crocskin gloves from Lakeland. These gloves feature greater cut resistance than many aramid gloves at a very affordable price. Crocskins handle sharp edges with ease. A unique blend of yarns give Crocskins superior protection.
|
|
| Style No | Description |
| 30-130 S-XL | Crocskin blended Kevlar gloves |
 |
Design the protection exactly where you need it. The DesPro work gloves build protection exactly where it is needed. The balance of the glove is knitted utilizing a more economical yarn where the protection is not as demanding. By using a combination of materials, the result is a product that protects yet costs less. DesPro gloves can be made from any combination of yarns for any industry. From food services to industrial to warehouse, Lakeland can special knit a glove that suits your needs. Lakeland can knit your company logo or name as an integral part of your glove.
|
 |
Knitted with the same yarn, DesPro Plus is designed to deliver a cost effective glove with the protection you need, exactly where you need it. The knit is "doubled" up in high stress / wear areas to focus on the protective qualities of the yarn, while lower wear areas stay protected, but at a lower cost. The result is a glove that keeps you safe, wears well and doesn't break the bank
|
  |
| Low particulate count. Eliminates contamination to surfaces which cause blemishes, craters, fisheyes and other imperfections. GleamClean™ Low-Lint Glove, Style No. 13-1550 These gloves come in two styles: plain knit and dotted block styles
|
 |
Leather protected gloves; Dinohyde gloves give you the extra measure of protection from puncture or contact with extremely sharp edges. Dinohyde combines the cut resistant features of Kevlar or Spectra (your choice) with a protective layer of leather. The goves can be customized to fit your specific work application. Leather can be placed on the palm, backside or index fingers
|
 |
 |
| 7-1506 (Latex) | 22-1507 (NBR) |
|
|
 Blocks |
 Criss Cross |
 Dotted Fingers / Palm Coat |
 Dots |
 Grip Plus |
 Palm Coat |
 Stripes |
||
Lakeland has a variety of patterns to best fit your needs. Lakeland offers a broad selection of glove patterns and coatings for safe handling of certain sharp, hot or slippery materials, each to handle specific situations. Every Lakeland glove pattern is designed to provide the best grip possible for a specific handling job. Our patterned gloves are used widely and effectively in industries such as sheet metal, glass handling, food processing, meat packaging, and automotive manufacturing. The patterns shown above are basic styles. Other patterns available upon request.
|
||
 |
|
| Blended safety gloves are more versatile. Just as two heads are better than one, Lakeland's special blends of two or more yarns provide superior protection in the workplace. Our Mocktwist® single ply yarn combines two different synthetic materials spun together; rugged DuPont Kevlar and a cotton or nylon fiber. These blends give a safety glove Kevlar's tough cut resistance and give the flexible comfort and economics of cotton. The result is rugged, affordable comfort. While none of the blended products provide 100% of the physical wear resistance of Kevlar, there are many applications in which Lakeland's blends, both mingled or plated types are quite suitable, even preferred. | |
| Style No. | Description |
| Blended Gloves | |
| 2100 KNB | Kevlar / Nylon men's gloves |
| 2110 KNB | Kevlar / Nylon ladies gloves |
| Mocktwist Gloves | |
| 26-381 | Kevlar / Nylon men's gloves |
| 26-379 | Kevlar / Nylon ladies gloves |
| Plated Gloves | |
| 26-328 | Kevlar / Nylon men's gloves |
| 26-621 | Kevlar / Nylon ladies gloves |
 |
 |
 |
| Lakeland knows the importance of people's arms and offers its high-tech, proven line of protective sleeves to customers with confidence. Our wide bodied DextraGard sleeves provide superior cut resistance and flexible comfort to industrial and food industry applications, sheet metal, HVAC, pulp and paper mills and fish / meat processors. These sleeves offer less than 2% moisture absorption, so after laundering they maintain their neat, hygienic appearance longer than other sleeves. Their breathability, washability and economical cost-to-wear ratio make them a popular choice. Lakeland's line of black sleeves includes products ranging from 4" TO 32" length. They are available in various materials: eg., high strength man made fibers combined with a stainless steel core (like Grapolator gloves / sleeves); Thermbar® for excellent heat resistance, lightness and dexterity; and black Kevlar fabrics. All of our black sleeves are ideal in situations where messy applications create messy residues. Where good abrasion and cut resistance, thermal properties and durability are required, Lakeland sleeves of Kevlar are recommended. These sleeves come in standard 3" widths and wide-body 4-1/4" styles. The wide-bodies are more comfortable for workers that need a larger width sleeve or when the wearer has large arms. The sleeves are also available a combinations of outer Kevlar with inner cotton, affording the best protection and comfort at an economical price. |
||
| Style No. | Description | |
| Kevlar Sleeves | ||
| 41222 | 12" 100% Kevlar, 2 ply sleeves, 3" width | |
| 41422 | 14" 100% Kevlar, 2 ply sleeves, 3" width | |
| 41622 | 16" 100% Kevlar, 2 ply sleeves, 3" width | |
| 41822 | 18" 100% Kevlar, 2 ply sleeves, 3" width | |
| Extra Wide Kevlar Sleeves | ||
| 41222X | 12" extra wide, 100% Kevlar, 2-ply sleeves, 4-1/4" width | |
| 41422X | 14" extra wide, 100% Kevlar, 2-ply sleeves, 4-1/4" width | |
| 41622X | 16" extra wide, 100% Kevlar, 2-ply sleeves, 4-1/4" width | |
| 41822X | 18" extra wide, 100% Kevlar, 2-ply sleeves, 4-1/4" width | |
| DextraGard Sleeves | ||
| 9412 | 12" DextraGard, 5-1/4" width | |
| 9414 | 14" DextraGard, 5-1/4" width | |
| 9416 | 16" DextraGard, 5-1/4" width | |
| 9418 | 18" DextraGard, 5-1/4" width | |
| Grapolator Sleeves | ||
| 94-4737 | 10" Grapolator sleeve, steel reinforced, 4" wide | |
| WSP home | Products | Suppliers | Protective Clothing | Lakeland index |