For more information, call Western Safety Products at 206-264-0808 or email sales@westernsafety.com.
We accept VISA and Mastercharge.
 |
|||
| The Fall Arrestor Deluxe is a complete lifeline system that includes Super Anchor's Super Grab non-mechanical rope grab device (pat. pending). Hand spliced by our own crews, we use a high quality domestic grade 12 strand polyolefin cord that is rated for 11,600 lbs. The buried taper creates a streamlined snag free eye splice. Each line has it own serial number and warning label that is protected by a UV treated clear shrink tube. The 5/8" diameter line features two special coatings that help to resist water penetration and reduce the effects of UV exposure, thus extending service life. Normally used in salt water for crab pot lines, this high visibility rope retains a higher degree of strength when knotted and is durable enough to hold up under rigorous job site conditions. The Super Grab rope grab, described below in detail, allows the lifeline length to be easily adjusted, and provides a more cost effective system when compared to those using a mechanical device. On the market since 1992, Super Anchor's Fall Arrestor® system is one of the most popular and widely used lifelines in residential construction. Once you use it, you'll never fall back on regular lines and mechanical rope grab devices. Available in two standard lengths with or without snap hooks. Custom length lines can be fabricated to your specifications and shipped in a few days. | |||
| Part # | Description | Material | Comments |
| 4001 | 30' Fall Arrestor lifeline and Super Grab | 12 strand, 11,600 lb. test polyolefin | Does not include carbiners |
| 4002 | 50' Fall Arrestor lifeline and Super Grab | 12 strand, 11,600 lb. test polyolefin | Does not include carbiners |
| 4009 | 30' Fall Arrestor lifeline with Snap Hook and Super Grab | 12 strand, 11,600 lb. test polyolefin | Order #5006 carabiner for Super Grab |
| 4010 | 50' Fall Arrestor lifeline with Snap Hook and Super Grab | 12 strand, 11,600 lb. test polyolefin | Order #5006 carabiner for Super Grab |
| Over ten years ago, Super Anchor Safety began to develope the Prussic knot as a viable alternative to cumbersome and hard to use mechanical rope grabs. After obtaining letters of compliance from WISHA and OSHA, the first generation of the Fall Arrestor rope grab became the standard component of every lifeline we spliced. Since that time, we have made several additional refinements that are now featured in the Super Grab.
The most reliable means of grabbing line and resisting slip is the prussic knot, which predates any written history that we know of. Used primarily in mountaineering and tree climbing (usually regarded as more hazardous than construction), this knot will maintain its grip on the lifeline even when wet, frozen or caked with mud. The prussic always remains flexible and expands/contracts with the lifeline. Any subtle force exerted in the ascending or descending direction initiates the locking feature with only a few inches of slip under extreme force. The prussic resists snagging and will not scratch metal roofing surfaces. Our patent pending Super Grab cover is engineered with a special type of polymer that's designed to deform when subjected to 900 lbs of force or more. The Super Grab may be used on other manufacturers lifelines when a qualified person ensures component compatibility. |
||
| Part # | Description | Compatibility |
| 4015 | Super Grab rope grab | All Fall Arrestor 5/8" lifelines |
 |
||
| Economy and durability are two factors that make Super Anchor Safety's three strand Fall Arrestor lifeline an outstanding value. Spliced from 5/8" polyolefin and rated for 10,000 lbs test, each line is fitted with a double locking snap hook and a modified version of the Super Grab rope grab device. It comes with its own serial number and warning label encapsulated with UV treated clear shrink tubing. Value lifelines are sold with or without rope grab devices. | ||
| Value Lifeline with Modified Super Grab | ||
| Part # | Description | Material |
| 4016 | 25' 3-strand lifeline system with modified Super Grab and two attached snaphooks | 3-strand polyolefin 10,000 lb. test |
| 4017 | 50' 3-strand lifeline system with modified Super Grab and two attached snaphooks | 3-strand polyolefin 10,000 lb. test |
| Value Lifeline without rope grab | ||
| 4020 | 25' 3-strand lifeline with snap hook | 3-strand polyolefin 10,000 lb. test |
| 4021 | 50' 3-strand lifeline with snap hook | 3-strand polyolefin 10,000 lb. test |
| 4022 | 75' 3-strand lifeline with snap hook | 3-strand polyolefin 10,000 lb. test |
| 4023 | 100' 3-strand lifeline with snap hook | 3-strand polyolefin 10,000 lb. test |
 |
||
| How about a lifeline system that does away with all the excess rope that trails behind you with conventional systems? A longtime standard in logging and lifting, this unique splicing configuration allows the line length to be adjusted from the top. Fabricated from the same cordage as Super Anchor Safety's Fall Arrestor Deluxe, each line is fitted with the Super Grab and comes with auto locking carabiners. A double locking snap hook may be specified instead. | ||
| Part # | Description | Material |
| 4014 | 30' Adjustable Fall Arrestor lifeline with Super Grab rope grab | 12 strand 11,600 lb. test polyolefin |
| 4013 | 50' Adjustable Fall Arrestor lifeline with Super Grab rope grab | 12 strand 11,600 lb. test polyolefin |
 |
 |
| 6008 full body harness with hook and loop chest strap | 6008 full body harness with integral shock absorber |
 |
 |
| 6035 full body harness showing front D-ring placement | 6035 full body harness showing rear D-ring placement |
| Want the best state of the art webbing fabrication and design? The Fall Arrestor line of full body harnesses offer domestic grade components, industry standard connecting hardware and Super Anchor Safety's in hous manufacturing. Stitch patterns are designed and tested to withstand extreme forces and are sewn on state of the art programmable machines to ensure production quality. In addition, the Fall Arrestor offers some unique design differences making it one of the most comfortable harnesses. Here's why: most of the body harnesses in use today are constructed using friction and adjuster buckles for the shoulder and chest straps. This method creates excess fabric that hangs down the front of the harness creating its own hazard that, according to some workers, can be aggravating unless your're standing straight up while working. The Fall Arrestor full body harness eliminates these annoyances by using a more streamlined design that takes up the excess webbing in the adjustment. We applied the same principle to our buckle-free hook and loop chest strap, a design that has been around for over 20 years. Ask anyone who has ever worn a Fall Arrestor harness, and they will tell you it's the most comfortable and easy to adjust harness that they have ever used. Available in Small, Large and X-Large, our harnesses are pre-adjusted at the factory so they fit right out of the bag. Super Anchor Safety also offers custom fabrication for those who require smaller or larger sizes. |
|
| Part # | Description / Comments |
| 6001-S/L/XL | Full body harness with rear D-ring |
| 6007-S/L/XL | Full body harness with rear nylon ring |
| 6008-S/L/XL | Full body harness with rear D-ring/shock absorber |
| 6011-S/L/XL | Full body harness with rear D-ring and 2 side D-rings |
| 6013-S/L/XL | Full body harness with rear D-ring/shock absorber and 2 side D-rings |
| 6035-S/L/XL | Full body harness with front and back D-rings |
| 6036-S/L/XL | Full body harness with front and back D-rings, High Visibility |
| 6037-S/L/XL | Full body harness with front, back and side D-rings, High Visibility |
| 6038-S/L/XL | Full body harness with front, back and side nylon rings, Low Conductivity |
 |
|
| Using only the highest quality components, we are proud to offer the Total Package Deluxe fall protection system. It's our top seller because no other system can compare. After many years of field testing with our own construction crews, we found that a 12 strand lifeline with our non-mechanical rope grab and aluminum auto-locking carabiners performed longer with fewer problems than conventional equipment. We include the #6008 full body harness, a 12 strand lifeline/rope grab, two anodized aluminum auto-locking carabiners, and our total package manual all conveniently packaged in a black nylon carry bag. | |
| Part # | Description / Comments |
| 4003-S/L/XL | Total Package with 30' lifeline/rope grab, full body harness with integral shock absorber, two auto-locking carabiners, nylon carry bag and 48 page instruction manual. |
| 4004-S/L/XL | Total Package with 50' lifeline/rope grab, full body harness with integral shock absorber, two auto-locking carabiners, nylon carry bag and 48 page instruction manual. |
 |
|
| For years our suppliers have been bugging us to come up with a total packaging system that sells for less. After some pretty serious head scratching and component engineering, we came up with a solution that combines our famous Super Anchor Safety quality at a price that's hard to beat. With our "Value-Pak" personal fall protection system, you get the most for your safety dollars. Includes our most popular 6008 full body harness with integral shock absorber, a value series lifeline/rope grab, two factory attached double locking snap hooks, an ARS 5K re-usable anchor, and a total package manual. Neatly packed into a 3.5 gallon plastic bucket, it's quality without compromise. | |
| Part # | Description / Comments |
| 4018-S/L/XL | Value-Pak with 25' lifeline/rope grab, full body harness with integral shock absorber, two double locking snap hooks, 3.5 gallon carry bucket and instruction manual. |
| 4019-S/L/XL | Value-Pak with 50' lifeline/rope grab, full body harness with integral shock absorber, two double locking snap hooks, 3.5 gallon carry bucket and instruction manual. |
 |
|
| Web Lanyards OSHA standards allow a worker to free fall 6 feet before the personal fall protection equipment begins to arrest the fall. Lifeline adjustments combined with shock absorbing components and any lanyard used to link equipment together need to be carefully measured so as to limit the lenght of the free fall. Our web lanyards are fabricated in several lengths and configurations that allow the user to engineer the free fall distance when using ours or other manufacturer's equipment. Sewn on our automated machines, lanyards are constructed of 1" wide 9,800 lb. nylon webbing that is vat dyed to retain its color. The instruction/warning label is protected against abrasion using a UV treated clear shrink tubing. All web loop ends are reinforced with a wear pad that reduces chaffing caused by the connector and helps to extend the service life of the lanyard. Looking for a lanyard or connector that's not on our product list? Our custom design option allows you to specify the length and type of connector you need in short order. Shock Absorbers |
|
| Part # | Description / Comments |
| Fall Arrestor lanyards with carabiners | |
| 6009 | 18" web lanyard with 5006 auto-locking carabiner and loop end |
| 6012 | 24" web lanyard with 5006 auto-locking carabiner and loop end |
| 6022 | 48" web lanyard with 5006 auto-locking carabiner and loop end |
| 6024 | 60" web lanyard with 5006 auto-locking carabiner and loop end |
| 6017 | 72" web lanyard with 5006 auto-locking carabiner and loop end |
| Fall Arrestor lanyards with snaphooks | |
| 6002 | 18" web lanyard with 5005 double-locking snaphook and loop end |
| 6006 | 24" web lanyard with 5005 double-locking snaphook and loop end |
| 6021 | 48" web lanyard with 5005 double-locking snaphook and loop end |
| 6023 | 60" web lanyard with 5005 double-locking snaphook and loop end |
| 6014 | 72" web lanyard with 5005 double-locking snaphook and loop end |
| Fall Arrestor shock absorbers | |
| 6018 | Shock absorber with double-locking snaphook and small D-ring |
| 6025 | Shock absorber with double-locking snaphook and loop end |
| 6026 | Shock absorber with auto-locking carabiner and loop end |
| 6030 | Shock absorber with 2 loop ends (no hardware) |
| 6027 | 72" shock absorbing lanyard with double-locking snaphook and loop end |
| 6029 | 72" shock absorbing lanyard with auto-locking carabiner and loop end |
| 6040 | 72" shock absorbing lanyard with rebar snap and double-locking snaphook |
 |
|||
| Flashing components are made from the highest quality materials ensuring they remain functional for the service life of the roofing materials | |||
| Part # | Description | Use With: | Size |
| 2001 | Santoprene base | Asphalt, Wood | 8" x 10" |
| 2003 | Lead base | Tile Shake, Slate, B.U.D. | 12" x 16" |
| 2005 | Custom base | Lead, Aluminum, Copper, etc. | Specified |
| 2018 | E.P.D.M. base | Metal | 8" x 8" |
| 2020 | Aluminum/E.P.D.M. base | Tile, Slate | 20" x 20" |
| Flashing Packages & Accessories | |||
| 2008 | Tether Strap - single | ||
| 2812 | Tether Strap - 6-Pak | ||
| 2807 | Santoprene base packaged in retail single pack | ||
| 2808 | Black stem cover / tether packaged in retail single pack | ||
| 2808-G | Gray stem cover / tether packaged in retail single pack | ||
| 2809 | Santoprene base, black stem cover / tether packaged in retail single pack | ||
| 2810 | E.P.D.M. base, gray stem cover / tether packaged in retail single pack | ||
 |
|
| Stem covers are extruded with heavy gauge polyethylene and tabbed to allow tethering to base flashing. Choose color to match roof color |
|
| Part # | Description |
| 2007 | Black stem cover |
| 2007-G | Light gray stem cover |
| 2007-T | Terra cotta stem cover |
 |
||
| All attachment bolts are supplied in grade 8 dichromate finishes. Hex head screws and attachment bolts used to secure our anchors are the critical link between performance and failure. Original and replacement fasteners are carefully specified and tested to hold up under the extreme forces generated by a free fall. Do Not Substitute With Untested Replacements | ||
| Above Photo (left to right): A = 2011 B = 2009 C = 2014 / 2014-A D = 2013 / 2013-A E = 2012 F = 2006 / 2014 G = 2014-A H = 2017 I = 2016 J = 2015 |
||
| Part # | Description | Use With: |
| Fastener Packs | ||
| 2006 | Nut & Bolt kit for all ARS series | ARS anchors |
| 2009 | #12, 2-7/8" hex head screws (10 ea.) | 5K & Universal |
| 2011 | #12, 1-5/8" hex head screws (30 ea.) | Universal anchor |
| 2012 | 16d duplex nails for Universal (10 ea.) | Universal anchor |
| 2014 | 2-1/4" bolt kit and 4 16d sinkers | Vertical Wall anchor |
| 2014-A | 4" bolt kit and 4 16d sinkers | Vertical Wall anchor |
| 2010 | 1/4" x 1-1/4" nut drivers (1 ea.) | 2009 / 2011 |
| Replacement Fastener Kits | ||
| 2013 | #12 stainless spiral nails (10 ea.) | 3K & RS-20 |
| 2013-A | #12 stainless spiral nails (8 ea.) | Retro-Fit anchor |
| 2015 | 2.2" x 3/8" detent pin - ARS Moveable | 2x4 safety bar |
| 2016 | 4.3" x 3/8" detent pin | 2x4 safety bar |
| 2017 | 6.3" x 3/8" detent pin | 2x4 safety bar |
| 2019 | Replacement bolt kit | Vertical Wall anchor |
 |
||||
| All connectors supplied by Super Anchor Safety are proof loaded and certified to comply with OSHA and ANSI standards. Aluminum Carabiners: The Omega modified D-autolock carabiner has been the standard connector used by Super Anchor Safety for over 12 years. Anodized for high visibility and durability, the 1/2" diameter autolock carabiner will out last and out perform even the best snap hook on the market. Order as a standard component, accessory or on our custom fabricated webbing and lifelines. Rated for 24KN / 5395 lbs. Steel Carabiners: The Omega modified D-autolock steel carabiner is 7/16" in diameter and dichromate plated to resist corrosion. Fully compatible with all of our anchorage and webbing products. Rated for 8,900 lbs., this carabiner is just as durable as the aluminum version. We also offer thread locking versions for those who prefer a more complicated approach to connecting their equipment, available upon request. |
||||
| Part # | Description | Material | Opening Diameter | Strength |
| 5006 | Autolock carabiner, aluminum | Aluminum | 7/8" | 5,395 lbs. |
| 5001 | Autolock carabiner, steel | Steel | 7/8" | 8,960 lbs. |
| 5005 | Double locking snaphook | Stamped steel | 7/8" | 5,000 lbs. |
| 5009 | Swivel snaphook | Stamped steel | 3/4" | 5,000 lbs. |
| 5008 | Rebar snaphook | Stamped steel | 3/4" | 5,000 lbs. |
| 5004 | Large D-ring, add on component | Drop forged | 2-1/2" | 5,000 lbs. |
| 5007 | Small D-ring, add on component | Drop forged | 7/8" | 5,000 lbs. |
| WSP home page | Products page | Suppliers page |
| Fall Protection | Super Anchor Index | Previous Super Anchor Page |