• One piece fully integrated with water tank on top - no need for water tanks, stage pumps, other
• FSI Safety Tank Showers designed to meet all appropriate sections ofANSIZ.358.1 (all editions) and German DIN 12899 Part 1 -3.
• Ideal for use in remote locations where no power or water supply is available
• Four tank shower sizes with multiple options for all applications
Multiple options offered inclusive of:
• Immersion heaters
• Eyewash stations
• Audible and visual alarms
• Low level indicators
• Various voltages/electrics available

AquaNella Water Treatment
• Non chemical water treatment - no MSDS required - works via oxidization/ionization
• Prevents legionella and multiple other dangerous pathogenic bacteria
• Dramatically reduced maintenance
• Risk free storage of tempered water
• Simply drop AquaNella 'stick' in tank and enjoy up to 3 years of protection.
• Completely inert and non-hazardous for ease of disposal
• Also available for standing water 'deadlegs' protection

Non-Chemical water treatment for all FSI safety tank showers, 'deadlegs', or other standing water type environments. AquaNella provides viable and effective protection from Legionella, E Coli, Pseudomonas, Staphaureus, Entero Aerogenes, Salmonella Typhoid, other.

The media is approved by the WRC and its performance by NAMAS accredited laboratories. They comply with BS6920 Part 1, and meet the standards of Water Bylaws scheme. They also comply with the COSSH Regulations and Occupational Exposure Limits.

FSI DAT™ SERIES INFLATABLE DECON SHOWER SYSTEMS
ALL SYSTEMS REGARDLESS OF SIZE GENERAL SPECIFICATIONS

Frame: Heavy duty 1100 dtex polyester coated w. plastomer on both sides, UV/chemical resistant.
Cover: Heavy duty 420 denier nylon coated w. polyurethane (PVC) on both sides. UV/chemical resistant/fire retardant. Floor: PVC coated .52 mm polyester.
Standard color is 'EMS' blue exterior w. high visibility white inside color Green and white exterior canopy color also available at no extra cost. Other colors optional with an extra charge.
Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. available.
Comes complete with electric inflator/deflator, and high pressure scba fitting.
Unit supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the Inlet and outlet side and - doubling of showering capability in the future
Technical data:
Air pressure internally once inflated = 4.3 psi (03 bar) USA Federal Standard FS# 191 5041/5102/5134/5970 Test Method Structural
Test results
Total Weight (g/m2)-1055 Thickness (mm) - 0.90 Cut strip tensile strength (Ibs. /in.) - Warp = 450 - Weft = 404
Elongation (%) - Warp = 30 - Weft = 47 Tongue tear (Ibs.) - Warp = 87 - Weft = 100 Adhesion (Ibs. /in.) - Warp = 9.4 - Weft = 8.9
Density = 30 X 24.5
ALL OF THE ABOVE IS STANDARD FOR EVERY DAT™ SERIES SHOWER SYSTEM

FSI DAT™ 1010S - First Responder Hazmat Decontamination Shower System
The economy size DAT™1010S comes equipped as standard equipment with an integrally attached ground floor that wifl hold up to 50 gallons - 200 litres of water (with an 8"/20 cm berm approx.) before requiring pump out, 2 roll up windows - one on each side, 1 skylight, full closure slip in and out dirty entry/clean exit doors on each end, high pressure air inflation/deflation valve, one air inflation hose w safety cord, pressure relief valve, 4 stainless steel stakes and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, and hammer. All canopy walls are velcroed to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit air berms. Units can attach to a second shower or FSI shelter.
The DAT™1010S also comes complete with a qty of 3 spray nozzle heads and a single 5' (1.52m) length of coiled 1/2" (13 mm) hose with an attached multiple function spray gun with spray patterns and flows meant to gently yet thoroughly drench and decon victims. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. Flows per shower head and per spray gun = approx. 1 gpm (4 Ipm) optimum and dependent on water volumes available.
Simply Inflate the unit and plug into a water supply. DAT™1010S offered with 1 - 3/4" (18 mm) high pressure 300 psi (20 bar) GHT threaded inlet hose - other fittings available as specified. Decontamination can com­mence in less than 1 minute.
DAT™101 OS-Approx. 3'W X 3'L X 8'H, 9 sq ft., 45 Ibs. Carton size approx. = 36" L X 18" W X -12" H

FSI DAT™ 2020S - First Responder Hazmat Decontamination Shower System
The full size DAT™2020S comes equipped as standard equipment with an integrally attached ground floor that will hold up to 100 gallons of water (with an 8 " berm approx.) before requiring pump out, 2 roll up windows -one on each side, 1 skylight, full closure slip in and out dirty entry/clean exit doors on each end. high pressure air inflation/deflation valve, one air Inflation hose w, safety cord, pressure relief valve, 4 stainless steel stakes and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, and hammer. All canopy walls are velcro'd to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit air berms. Units can attach to a second shower or FSI Shelter.
The DAT™2020S also comes complete with a qty of 7 spray nozzle heads and a single 5' (150 cm) length of coiled 1/2" hose with an attached multiple function spray gun with spray patterns and flows meant to gently yet thoroughly drench and decon victims. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. Flows per shower head and per spray gun = approx. 1 gpm/4 Ipm optimum and dependent on water volumes available.
Simply inflate the unit and plug into a water supply. DAT™2020S offered with 1 - 3/4" (18 mm) high pressure 300 psi (20 bar) GHT threaded inlet hose - other fittings available as specified. Decontamination can commence In less than 1 minute.
DAT™2020S - Approx. 7'WX 7'L X 8'H, 50 sq, ft, 80 Ibs. Carton size approx. = 45" L X 22" W X 12" H

FSI DAT™2525S - Single Line Mass Casualty Hazmat Decontamination Shower System

The FSIDAT™2525S is a one-line wide 7'W X 13'L X 8'H 3 station - 4'L, 5'L. 4'L mass casualty decon shower system which handles a single line of ambulatory casual-ties in three sequential stations - (1) undress, (2) shower (3) redress- This unit deploys in under two minutes, and processes three ambulatory personnel at a time (one In each stage of the unit).
Undress and redress stations are dry (plumbing Is possible and optional); the middle shower station includes 6 shower heads (2 sections of 3 shower heads) and one hanging coiled 1/2" hose line with attached mul-tiple function spray nozzle which thoroughly drenches and decontaminates via a fine water mist for a total of 7 shower heads as standard. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. Flows per shower head and per spray gun = aoprox. 1 gpm/4 Ipm optimum and dependent on water volumes available. As an option - by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above.
Wastewater is contained within integral ground floor and 6" berm erected when system is initially inflated (holds approx. 80 gallons/320 litres of waste water before pump-out is required).

Includes full closure slip in and out dirty entry/clean exit doors on each end, 2 cross divider curtains, two roll up windows (one on each side), 2 skylights, high pressure air inflation/deflation valve, one air inflation hose w, safe-ty cord, pressure relief valve, 6 stainless steel stakes and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, 2 HVAC/dirty clothes ducts with ties closures, and hammer. All canopy walls are velcroed to the floor air berms for air lock, and reflective striping Is found on the upper air vents above doors and on entry and exit integral shower stall air berms. Units can attach to a second shower or FSI Shelter.
Simply inflate the unit and plug into a water supply DAT™2525S offered with integral ground floor, 1 - 3/4" (18 mm) high pressure 300 psi (20 bar) GHT threaded inlet hose - other fittings available as specified. Decontamination can commence in 1 - 2 minutes-
DAT™2525S - 7'W X 13'L X 8'H Approx. 91 sq. ft., 93 Ibs. Carton size approx. = 49-LX 24"W X 16"H

FSI DAT™2626S - Single Non-Ambulatory Hazmat Decontamination Shower System
The FSI DAT™2626S is a one-line wide 7'W X 13'L X 8'H, single non-ambulatory decon shower system meant to handle a single stretcher borne victim wilh attendants working on either side. Can also be used to decon 2 walking wounded personnel at a time. This unit deploys in 1 - 2 minutes, and processes one stretcher borne or 2 walking victims at a time.
The shower station includes 4 hanging coiled 1/2" hose lines with attached multiple function spray nozzles which thoroughly drench and decontaminate via a fine water mist. Shutoffs and quick disconnects supplied with every trigger gun. Flows per spray gun = approx. 1 gpm/4 Ipm optimum and dependent on water volumes available. As an option - one can double the capacity if required
Wastewater is contained within integral ground floor and 8" berm erected when system is initially inflated (holds approx. 160 gallons/640 litres of waste water before pump-out is required).
Includes full closure slip In and out dirty entry/clean exit doors on each end, two roll up windows (one on each side), 2 skylights, high pressure air Inflation/deflation valve, one air inflation hose w. safety cord, pressure relief valve, 6 stainless steel stakes and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, 2 HVAC/dirty clothes ducts with tie closures, and hammer. All canopy walls are velcroed to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms. Units can attach to a second shower or FSI shelter.
Simply inflate the unit and plug into a water supply. DAT™2626S offered with integral ground floor, 1 - 3/4" (18 mm) high pressure 300 psi (20 bar) GHT threaded inlet hose - other fittings available as specified. Decontamination can commence in less than 2 minutes.
DAT™2626S - 7' W X 13' L X 8' H Approx. 91 sq. ft., 93 Ibs. Carton size approx. = 49"L X 24"W X 16-H

FSI DAT™ 3030S - Two Line Non-Ambulatory Decon Shower Mass Casualty System
The DAT™3030S is a 2 (two) line system designed to handle 2 non-ambulatory personnel on stretchers with attendants working on either side of the victim inside the unit, or the DAT3030S can handle 1 non-ambulatory and two ambulatory, or 4 ambulatory personnel at any one time.
The DAT™3030S comes equipped as standard equipment with an integrally attached ground floor that will hold up to 200 gallons of water (with an 8" berm approx.) before requiring pump out, 2 roll up windows - one on each side, 2 skylights, full closure slip in and out dirty entry/clean exit doors, 2 (two) 14" HVAC/clothes inlet/outlets with tie closures, 1 (one) center divider curtain, 4 (four) 1/2 cross divider curtains, air inflation valve, one air inflation hose w. safety cord, pressure relief valve, 4 stainless steel stakes and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, and a hammer All canopy walls are velcroed to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit Integral shower stall air berms. Units can attach to a second shower or FSI shelter. Simply inflate the unit - plug into a water supply and commence decon in 1 - 2 minutes. The DAT™ 3030S also comes complete with a with a qty. of 12 spray nozzle heads and qty. of 4 (four) 5" lengths of coiled 1/2" hose with attached multiple function spray guns with shutoffs and quick disconnects offering spray patterns and flows meant to gently yet thoroughly drench and decon victims. Flows per shower head and per spray gun = approx. 1 gpm/4 Ipm optimum and dependent on water volumes
As an option - one can double the capacity if required. Simply inflate the unit and plug into a water supply - unit Is offered with 1 -3/4" (18 mm) high pressure 300 psi (20 bar) GHT threaded Inlet hose - other fittings available as specified.
DAT3030S - Approx. 10' W X 10' L X 8' H, 100 sq. ft., 95 Ibs. Carton size approx. = 48"L X 23 "W X 16" H

FSI DAT™3535S - Two Line Mass Casualty Decon Shower
The FSI model DAT™3535S is a two-line wide (5' W, 5' W), 3/4 station mass casualty decon shower system which handles two parallel lines of casualties at the same time in four sequential stations - (1) undress 4' section, (2) detergent shower & (3) rinse shower in a 7' section, (4) redress 4' section. This unit deploys in under two minutes, and processes 2 or 4 ambulatory personnel at a time, and/or 2 non-ambulatory personnel at one time or any combination. Undress and redress stations are dry (plumbing is possible and optional); each of the four shower stations include 3 showerheads and one hanging coiled 1/2" hose line with attached multiple function spray nozzle which thoroughly drenches and decontaminates via a fine water mist. There are a total of 4 multiple function spray nozzle guns and 4 sections of 3 shower heads for a total of 16 water discharge ports is standard. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. As an option - by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above.
Wastewater is contained within integral ground floor and 6" high water berm when system is initially inflated (holds approx. 150 gallons/600 litres of waste water before pump-out is required).
Includes separate "dirty" entry and "clean" full sized exit doors, center divider curtain to separate lines 1 and 2, 6 - 1/2 cross divider curtains, 2 - 3/4" (18mm) High pressure 300 psi (20 bar) GHT threaded Inlet hoses-other fittings available as specified, reflective air vents at each end, reflective striping on each end to delineate built in decon pool. All canopy walls are velcroed to the floor air berms for air lock.
DAT™3535S - Weight approx. 145 pounds Inflated size is 10'W x 15'L x 8'H., 150 sq.ft.
Carton size approx. 50" L X 2 5" W X 17" H

FSI DAT™ SERIES INFLATABLE SHELTER SYSTEMS ALL SYSTEMS REGARDLESS OF SIZE GENERAL SPECIFICATIONS

Air pressure internally once inflated = 4.3 psi (0.3 bar) USA Federal Standard FS #191 5041/5102/5134/5970 Test method structural test results Total Weight (g/m2)- 1055
Thickness (mm) - 0.90 Cut strip tensile strength (Ibs. /in.) - Warp = 450 - Weft = 404 Elongation (%) - Warp = 30 - Weft = 47
Tongue tear lbs. - Warp = 87 - Weft = 100
Adhesion (Ibs. /in.; - Warp = 9.4 - Weft = 8.9
Density = 30 X 24.5
Frame: Heavy duty 1100 dtex polyester coated w, plastomer on both sides, UV/chemical resistant. Cover; Heavy duty 420 denier nylon coated w-polyurethane (PVC) on both sides. UV/chemical resistant/fire retardant. Floor: PVC coated .52 mm polyester.
Standard color is 'EMS' Blue exterior w, high visibility canopy color also available at no extra cost. Other colors optional with an extra charge.
All shelters have full privacy zipper closure and full screen zipper closure slip in and out dirty entry/clean exit doors, air inflation valve, one air inflation hose w. safety cord, pressure relief valve, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, and a hammer. All canopy walls are velcroed to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms. Units can attach to a second shower or FSI shelter. Simply inflate the unit and commence use in approx. 1 - 4 minutes (size of shelter dependent).
Every FSI DAT™ series shelter comes complete with electric inflator/deflator, and high pressure scba fitting.
All units supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side.
All DAT™ series shelters available with cross and center divider curtains, side doors, extra windows, skylights, HVAC/clothing ducts with ties, etc, as below
F-CDC34A 1/2 cross divider curtain, heavy duty, non see through, light color, removable, slip thru -for DAT3060, DAT3030, DAT3015, DAT4070
F-CDC34 Cross divider curtain, heavy duty, non see through, light color, removable, slip thru - for DAT3060, DAT3030, DAT3015, DAT4070
F-CDC56A 1/2 cross divider curtain, heavy duty, non see through, light color, removable, slip thru - for DAT5672, DAT6000, DAT6012, DAT9018
F-CDC56 Cross divider curtain, heavy duty, non see through, light color, removable, slip thru - for DAT5672. DAT6000, DAT6012, DAT9018
F-CD34 Center divider curtain for DAT3060, DAT3030, DAT3015, DAT4070
F-CD56 Center divider curtain as above - for DAT5672, DAT6000, DAT6012, DAT9018
F-S Skylights for all shelters
F-STE Private stencil on shelter/shower/pool/other — limited sizes, styles, and colours avail.
F-SD Side door for shelters F-EW Additional windows per shelter
F- AD Additional approx 14"/35 cm air duct cloth Inlet/outlet for HVAC/cloth ing/other w. tie closures
F-SC Cloth velcro skylite cover — per skylite cover
F-SCS Shower curtain stall, heavy duty, non see through, light color, removable, slip thru, for use inside containment decon pool.
F-PPSH A complete set of pre-plumbed qty. of 6 spray nozzle shower heads (3 each in 2 of the 4 corners) with shutoffs, and 1 (one) length of 5" coiled 1/2" hose (stretches to 14') with attached multiple function spray guns with spray patterns and flows meant to gently yet thoroughly drench and decon victims. Flows per shower head and per spray gun = approx. 1 gpm/ 4 Ipm optimum and dependent on water volumes avail.
F-SH Single or double hanging shower head
F-SB Gentle scrub - hand held shower wand/brush
F-MD1 Two extra full man doors on each end of DAT series showers/shelters (smallest sizes may not accommodate two full extra man doors on each end)
F-MD2 3 extra full man doors on each end of the DAT series showers/shelters, (smaller sized FSI shel-ters/showers may not be able to accommodate three man doors on each end)
Multiple optional accessories available inclusive of air heaters, air coolers, elevation grids, waste water pumps, etc. available.

FSI DAT™3060S - Three Line Mass Casualty Decon Shower System

The FSI DAT™3060S is a three-line wide (4' x 5' x 4'), 3 or 4-station mass casualty decon shower system which handles two or three parallel lines of casualties at the same time in three or four sequential stations - (1) undress, (2) detergent shower #1 - (3) rinse shower #2 OR handle 2 personnel in separate showers simultaneously in each lane, (4) redress. This unit deploys in under two minutes, and when configured as a three-line system the DAT3060S processes up to six ambulatory persons at a time or 3 non-ambulatory persons on stretchers simultaneously - or any combination.
When configured as a 2-line system (this is accomplished by removing the two center divider curtains that make the unit a 3 -line unit and hanging the true middle center divider curtain included with every DAT3060S) this unit processes two non-ambulatory patients on stretchers or up to 4 ambulatory personnel in a two-line wide (6.5' x 6.5') configuration.
Undress and redress stations are dry (plumbing Is possible and optional); Four (4) shower stations include 3 showerheads and one hanging coiled 1/2" hose line with attached multiple function spray nozzle which thoroughly drenches and decontaminates via a fine water mist. The two (2) middle line shower stations include two hanging coiled 1/2" hose lines with attached multiple function spray nozzles. There are a total of 20 water discharge ports as standard. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. As an option - by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above.
If an optional detergent injector is used then the shower #1 station can be used for detergent cleansing and the shower #2 station may be used for rinse.
Wastewater is contained within integral 13' W X 12' L ground floor and 6" berm erected when system is initially inflated (holds 300 gallons/1200 litres of waste water before pump-out is required).
Includes separate "dirty" entry and "clean" full sized exit doors, 9 (nine) 1/3rd cross divider curtains, 3 (three) center divider curtains to separate lines 1 and 2 (or lines 1,2, and 3), two windows, 2 skylights, 2 -3/4" (18mm) high pressure 300 psi (20 bar) GHT threaded inlet hoses - other fittings available as specified, reflec-tive air vents at each end, reflective striping on each end to delineate built in decon pool. All canopy walls are velcroed to the floor air berms for air lock.
DAT 3060S - Weight approx. 185 pounds. Inflated size is 13' W x 20' L x 9- H, 260 sq. ft.
Carton size approx - 51"L X 26"W X 19"H

FSI DAT™4070S - Four Line Mass Casualty Decon Shower System

The FSI model DAT™4070S is a four-line (43.5" X 4 lines W), 3 or 4-station mass casualty decon shower system which handles four parallel lines of casualties at the same time In three or four sequential stations -(1) undress, (2) detergent shower #1 - (3) rinse shower #2 OR handle 2 personnel in separate showers simultaneously In each lane, (4) redress. This unit deploys in under three minutes, processes four non-ambulatory patients on stretchers or up to 8 ambulatory personnel at a time and/or any combination of the above.
Undress and redress stations are dry (plumbing is possible and optional); shower stations include 3 showerheads and one hanging coiled 1/2713 mm hose line with attached multiple function spray nozzle which thoroughly drenches and decontaminates via a fine water mist There are a total of 12 miiltiple function spray nozzle guns and 4 sections of 3 shower heads for a total of 24 shower heads as standard. As an option - by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above The unit is configured with a 4' undress privacy area on entrance, a 15' long decon shower area divided into 2 separate shower stalls in each line, and a 4' redress privacy area prior to exiting, Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. As an option - by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above.
If an optional detergent injector is used then the shower #1 station can be used for detergent cleansing and the shower #2 station may be used for rinse.
Wastewater is contained within integral 14.5' wide X 15' long ground floor and 6-inch berm erected when system is initially Inflated (holds approx. 400 gal/1600 litres of waste water before pump-out is required-waste pump recommended, however).
Includes separate "dirty" entry and "clean" full sized exit doors, three (3) center divider curtains to separate all four lines, twelve (12) 1/4 cross divider curtains, two windows on each side, 2 skylights, 2 -3/4" (18 mm) High pressure 300 psi (20 bar) GHT threaded inlet hoses - other fittings available as specified, reflective air vents at each end, reflective stnping on each end to delineate built in decon pool. All canopy walls are velcroed to the floor air berms for air lock.
DAT 4070S - Wt. approx. 295 pounds. Inflated size is 14.5' wide x 23' long x 9' high. 330 sq. ft.
Carton size approx. = 52"L X 27" X 20" H

FSI DAT™4099S - Five Line Mass Casualty Decon Shower System

The FSI model DAT™4099S is a five-line (36" X 5 Lines W), 3 or 4-station mass casualty decon shower system which handles four parallel lines of casualties at the same time in three or four sequential stations-(1) undress, (2) detergent shower #1 - (3) rinse shower #2 OR handle 2 personnel in separate showers simultaneously in each lane, (4) redress. This unit deploys in 3-4 minutes, processes five and/or up to 10 non-ambulatory patients on stretchers at one time OR 5 and/or up to 10 ambulatory personnel at a time and/or any combination of the above - Undress and redress stations are dry (plumbing Is possible and optional); shower stations may include 3 shower-heads and one hanging coiled 1/2" hose line with attached multiple function spray nozzle which thoroughly drenches and decontaminates via a fine water mist. There are a total of 16 multiple function spray nozzle guns and 4 sections of 3 shower heads for a total of 28 shower heads as standard. As an option - by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above. The unit is configured with a 4' undress privacy area in 5 lines on entrance, a 15.5' long decon shower area divided into 2 separate shower stalls in each line, and a 4' redress privacy area in 5 lines prior to exiting. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. As an option - by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above.
If an optional detergent injector is used then the shower #1 station can be used for detergent cleansing and the shower #2 station may be used for rinse.
Wastewater is contained within integral 15' wide X 15.5' long ground floor and 6" berm erected when system is initially inflated (holds 450 gal. /1800 litres of waste water before pump-out is required - waste pump recommended, however).
Includes separate "dirty" entry and "clean" full sized exit doors, four (4) center divider curtains to separate all five lines, fifteen (15) 1/5 cross divider curtains, two windows on each side, 2 skylights, 2 - 3/4" (18 mm) high pressure 300 psi (20 bar) GHT threaded inlet hoses - other fittings available as specified, reflective air vents at each end, reflective striping on each end to delineate built in decon pool. All canopy walls are velcroed to the floor air berms for air lock.
DAT™ 4099S - Weight approx. 325 pounds. Inflated size is 15' wide x 23.5' long x 9' high. 352 sq. ft.
Carton size approx. = 53"L X 28"W X 24"H

SPECIFICATIONS PER SIZE OF SHELTER

DAT™3030 Approx. 10'W X 10'L X 8' H, 100 sq. ft., 95 Ibs. Carton size approx. = 48"L X 23"W X 15"H. 2 windows - one on each side, 2 skylights, 2 (two) 14" HVAC/clothes inlet/outlets with tie closures, 4 stainless steel stakes and ground anchor points.

DAT™3015 Approx. 10'W X 15'L X 8'H - Shelter only, 150 sq.ft., 100 Ibs. Carton size approx. = 48"L X 24"W X16"H. 2 windows - one on each side, 2 skylights, 2 (two) 14" HVAC/clothes inlet/outlets with tie closures, 6 stainless steel stakes and ground anchor points.

DAT™3060 Approx. 10'W X 20'L X 9' H - Shelter only, 200 sq. ft., 143 Ibs. Carton size approx. = 49"LX 24"WX 17"H. 2 windows - one on each side, 2 skylights, 2 (two) 14" HVAC/clothes inlet/outlets with tie closures, 10 stainless steel stakes and ground anchor points.

DAT™4070 Approx. 13' W X 23' L X 9' H - Shelter only, 300 sq. ft., 250 Ibs. Carton size approx. = 50"LX25"WX 18"H. 4 windows - two on each side, 2 skylights, 2 (two) 14" HVAC/clothes inlet/outlets with tie closures, 12 stainless steel stakes and ground anchor points.

DAT™5672 Approx. 18'W X 24'L X 9' H - Shelter only, 432 sq. ft., 330 Ibs. Carton size approx. = 50"LX27"WX 19"H. 4 windows-two on each side, 2 skylights, 2 (two) 14" HVAC/clothes inlet/outlets with tie closures, 12 stainless steel stakes and ground anchor points.

DAT™6000 Approx. 20'W X 30'L X 9'H - Shelter only, 600 sq. ft., 450 Ibs. Carton size approx. = 50"L X 28"W X 20"H. 6 windows - three on each side, 3 skylights, 4 (four) 14" HVAC/clothes inlet/outlets with tie closures, 16 stainless steel stakes and ground anchor points.

DAT™6012 Approx. 20' W X 40' L X 10' H - Shelter only, 800 sq. ft. , 615 Ibs. Carton size approx. = 50"L X 28"W X 24"H. 6 windows - three on each side, 3 skylights, 4 (four) 14" HVAC/clothes inlet/outlets with tie closures, 20 stainless steel stakes and ground anchor points. Unit comes with a second air inflation valve/ air inflation hose w, safety cord/pressure relief valve.

FSI DAT™ 'QE' SERIES QUICK ERECT SHELTER SYSTEMS
ALL FSI 'QE' SERIES QUICK ERECT SHELTERS REGARDLESS OF SIZE GENERAL SPECIFICATIONS

Frame: Patent pending lattice framework retractable aluminum tubing, UV/chemical resistant.
Canopy cover:

Heavy duty 420 denier nylon coated w. polyurethane (PVC) on both sides. UV/chemical resistant/fire retardant. Floor: PVC coated .52 mm polyester.
Standard color is 'EMS' blue exterior w. high visibility white inside color. Green and white exterior canopy color also available at no extra cost. Other colors optional with an extra charge.
All 'QE' series showers have full privacy velcro closure slip in and out dirty entry/clean exit doors, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, and a hammer. All canopy walls are attached to the floor, yet removable for repairs/cleaning/other uses, and reflective striping is found on the upper air vents above doors to clearly mark entry/exit. Units can attach to a second shower or FSI shelter. Simply 'QE' Quick Erect the unit and commence use in approx. 4 minutes (size of shower system dependent).
All units supplied w. no charge redundant features allowing for - hanging undress/redress kits etc- on the inlet and outlet side- Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. available.

F-CD34QE - Center divider curtain for DAT QE1913
F-CD56QF Center divider curtain for DAT QE2115
F-S - Skylights for all shelters
F-STE - Private stencil on shelter/shower/pool/other — limited sizes, styles, and colors avail.
F-SD - Side door for shelters
F-EW - Additional windows per shelter
F- AD - Additional approx 14'735 cm air duct cloth inlet/outlet for HVAC/clothing / other w. tie closures
F-SC - Cloth velcro skylite cover — per skyltte cover
F-SCS - Shower curtain stall, heavy duty, non see through, light color, removable, slip thru, for use inside containment decon pool.
F-PPSH - A complete set of pre-plumbed qty of 6 spray nozzle shower heads (3 each in 2 of the 4 corners) with shutoffs, and 1 (one) length of 5' coiled 1/2" mm hose (stretches to 14') with attached multiple function spray guns with spray patterns and flows meant to gently yet thoroughly drench and decon victims. Flows per shower head and per spray gun = approx, 1 gpm/4 Ipm optimum and dependent on water volumes avail.
F-SH - Single or double hanging shower head
F-SB - Gentle scrub - hand held shower wand/brush
F-MD1 - Two extra full man doors on each end of DAT QE series showers/shelters

Decon Pools - Multiple choices are available from FSI - round/rectangular air Inflate/quick erect pop up style - see FSI literature
F-MD2 - 3 extra full man doors on each end of the DAT series showers/shelters, (smaller sized FSI shelters/showers may not be able to accommodate three man doors on each end)
Multiple optional accessories available inclusive of air heaters, air coolers, elevation grids, waste water pumps, etc. available.

FSI 'QE' SERIES QUICK ERECT SHOWER SYSTEMS

FSI DAT™QE1913S2 Quick Erect Two Line Mass Casualty Decon Shower System

The FSI model DAT™QE1913S2 is a two-line wide (6.5'W x 6.5'W), 3/4 station mass casualty decon shower system which handles two parallel lines of casualties at the same time in four sequential stations - (1) undress 5' - 1.52M section, (2) detergent shower & (3) rinse shower in a 9- 2.74M section, (4) redress 5' section - 1.52M. This Jnit deploys In under four minutes, and processes 2 or 4 ambulatory personnel at a time, and/or 2 non-ambuiatory personnel at one time or any combination.
Undress and redress stations are dry (plumbing is possible and optional); each of the four shower stations include 3 showerheads and one hanging coiled 1/2" hose line with attached multiple function spray nozzle which thoroughly drenches and decontaminates via a fine water mist. There are a total of 4 multiple function spray nozzle guns and 4 sections of 3 shower heads foi a total of 16 water discharge ports as standard. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. As an option - by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above.
Wastewater is contained within supplied 'fit to size' waste water containment pool w. 6-inch high water berm. Lays flat when empty, sides stand up to hold waste water w. 3/4" (19 mm) drain in corner.
Includes separate "dirty" entry and "clean" full sized exit doors, center divider curtain to separate lines 1 and 2, 4-1/2 cross divider curtains, 2-3/4" (18 mm) high pressure 300 psi (20 bar) GHT threaded inlet hoses-other fittings available as specified, reflective air vents at each end. All canopy walls and floors are attached yet removable for repair/cleamng/other.
TECHNICAL DATA:
Frame: Patent pending lattice framework retractable aluminum tubing, UV/chemlcal resistant. Canopy cover:
Heavy duty 420 denier nylon coated w. polyurethane (PVC) on both sides. UV/chemical resistant/fire retardant. Floor: PVC coated -52 mm polyester.
Standard color is 'EMS' blue exterior w. high visibility white inside color. Green and white exterior canopy color also available at no extra cost. Other colors optional with an extra charge.
All 'QE' series showers have full privacy velcro closure slip In and out dirty entry/clean exit doors, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, and a hammer. All canopy walls are attached to the floor, yet removable for repairs/cleaning/other uses, and reflective striping is found on the upper air vents above doors to clearly mark entry/exit. Units can attach to a second shower or FSI shelter. Simply 'QE' Quick Erect the unit and commence use in approx. 4 minutes (size of shower dependent).
All units supplied w. no charge redundant features allowing for - hanging undress/redress kits etc, on the Inlet and outlet side.
DAT™ QE1913S2-Approx. 13'W X 19'L X 9'H -shower system with decon pool, 254 sq. ft., 290 Ibs. Carton size approx. = 42"L X 25"W X 42"H. 4 windows - two on each side, 2 skylights, 4 (four) 14" (35 mm) HVAC/clothes Inlet/outlets with tie closures, 12 stainless steel stakes and ground anchor points.

FSI DAT™QE1913S3 Quick Erect Three Line Mass Casualty Decon Shower System

The FSI model DAT™QE1913S3 is a three-line wide (4' x 5' x 4'), decon shower system which handles three parallel lines of casualties at the same time in three or four sequential stations - (1) undress 5' section, (2) detergent shower #1 - (3) rinse shower #2 OR handle 2 personnel in separate showers simul-taneously in each lane in a 9' section, (4) redress 5' section. This unit deploys in under four minutes, and processes up to six ambulatory persons at a time or 3 non-ambulatory persons on stretchers simultaneously - or any combination - Undress and redress stations are dry (plumbing is possible and optional); Four (4) shower stations include 3 showerheads and one hanging coiled 1/2" hose line with attached multiple function spray nozzle which thoroughly drenches and decontaminates via a fine water mist. The two (2) middle line shower stations include two hanging coiled 1/2" hose lines with attached multiple function spray nozzles. There are a total of 20 water discharge ports as standard. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. As an option - by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above.
If an optional detergent injector is used then the shower #1 station can be used for detergent cleansing and the shower #2 station may be used for rinse.
Wastewater is contained within supplied 'fit to size' waste water containment pool w/ 6-inch high water berm. Lays flat when empty, sides stand up to hold waste water w/ 3/4" (19 mm) drain in corner.
Includes separate Velcro closure "dirty" entry and "clean" full sized exit doors, 9 (nine) 1/3rd cross divider curtains, 2 (two) center divider curtains to separate lines 1, 2 and 3, two windows, 2 skylights, 2-3/4" (19mm) high pressure 300 psi (20 bar) GHT threaded inlet hoses - other fittings available as specified, reflective air vents at each end to clearly delineate entry/exit doors. All canopy walls/floors are attached to the frame yet are removable for ease of cleaning/repair/other.
TECHNICAL DATA:
Frame: Patent pending lattice framework retractable aluminum tubing, UV/chemical resistant. Canopy cover: Heavy duty 420 denier nylon coated w. polyurethane (PVC) on both sides. UV/chemical resistant/fire retardant.
Floor: PVC coated .52 mm polyester.
Standard color is 'EMS' blue exterior w/ high visibility white inside color. Green and white exterior canopy color also available at no extra cost. Other colors optional with an extra charge.
All 'QE' series showers have full privacy velcro closure slip in and out dirty entry/clean exit doors, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, and a hammer. All canopy walls are attached to the floor, yet removable for repairs/cleaning/other uses, and reflective striping is found on the supplied upper air vents above doors to clearly mark entry/exit- Units can attach to a second shower or FSI shelter. Simply 'QE' Quick Erect the unit and commence use in approx. 4 minutes (size of shower system dependent),
All units supplied w/ no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side.
DAT™ QE1913S3-Approx. 13'W X 19' L X 9'H -shower system with decon pool. 254 sq. ft., 299 Ibs. Carton size approx. = 42" LX25"WX42" H. 4 windows - two on each side, 2 skylights, 4 (four) 14" (35 mm) HVAC/clothes inlet/outlets with tie closures, 12 stainless steel stakes and ground anchor points.

FSI DAT™QE2115S4 Quick Erect Four Line Mass Casualty Decon Shower System

FSI Adult Disposable Backer Board w. Straps/Head Immobilizer

FSI Pediatric Disposable Backer Board w. straps/Head Immobilizer

SCENE MANAGEMENT

Wire Flags

Tyvek type with hood and booties (case of 25)

HazproofBoot

F-THDP24 - MCI TRAILER 24 FT 500 Mass Trauma/500 Mass Casualty/ 500 Mass Decon

Sked                           

BP Cuff

Aluminum "D" 0₂ Cylinder w. handle

IV FLUID ADMINISTRATION

Arm splint

Incident command vests (assorted)

Wire Flags

Detergent injection inducer system (attaches to heater)

Impact Goggles

Chemical Indicator tape (numerous agents)

24' American Hauler Trailer w. Beaver Tail door, side door, deluxe interior, with interior 12V lights, lighting/stabilizer package and hitch. E-track mounting system installed on interior trailer walls, 2 rows where there are no shelves, and 12 ratcheted fastening straps. Dual axle. GVWR 12,000 Ibs est, curb weight 3,250 Ibs est. Trailer painted red or white - client choice.

300 Gallon Heavy Duty Bladder Tank for waste water collection

F-THDP20 - MCI TRAILER 20 FT 500 Mass Trauma/400 Mass Casualty/400 Mass Decon

50' Extension cords

Tyvek F Suit with Hood & Booties XL

Infectious waste bags